OT FIT 40/220…240/1A0 LT2 S
.jpg)
.jpg)
Product family benefits
- Versatile scope of application due to output power range of up to 40 W
- Fulfill safety requirement due to overload, overtemperature protection
- High efficiency
- High quality of light thanks to <1% output ripple current
- Small housing for flexible luminaire designs
Areas of application
- Luminaires with flexible current setting (LEDset2)
- Suitable for indoor SELV installations
- Suitable for luminaires of protection classes I and II
- Suitable for downlights, spotlights and LED panels
- Independent mounting via Cable Clamp Kit possible
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
198…264 V
Total harmonic distortion
12 %
Power factor λ
095
Efficiency in full-load
86 %
Device power loss
6.0 W
Inrush current
15 A
Max. ECG no. on circuit breaker 10 A (B)
19
Max. ECG no. on circuit breaker 16 A (B)
30
Max. ECG no. on circuit breaker 25 A (B)
42
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
15…50 V
U-OUT (working voltage)
60 V
Nominal output current
500…1050 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
< 1 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
13…40 W
Maximum output power
40 W
Galvanic isolation primary/secondary
SELV
Current set
LEDset2
Galvanic isolation
SELV
Input voltage DC
-
Dimensions & weight
Mounting hole spacing, length
88.0 mm
Mounting hole spacing, width
34.0 mm
Product weight
10500 g
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
6.5…7.5 mm
Wire preparation length, output side
6.5…7.5 mm
Length
970 mm
Height
295 mm
Width
430 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20…+40 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
100000 h
Additional product data
Successor EAN
4052899617193
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, output side
Push terminal
Suitable for through-wiring
No
Programming
Programming device
LEDset
Certificates & standards
Approval marks – approval
CE
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 61000-3-3
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4052899957015
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
fe965ecc-1b0a-4e63-95bc-09d95f546f8e
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899957015 |
UNV
| 1 | |||
| 4052899957084 |
VS
| 20 | 228mm x 208mm x 78mm | 2206.00g | 3.70dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Very compact SELV drivers for filigrane luminaires.
The very wide operating window of this driver offers flexibility in choosing compatible LED modules. The small dimensions of this driver are ideal for compact luminaires and an optional cable clamp allows independent installations. Additionally a high quality of light can be achieved thanks to the low ripple.
The very wide operating window of this driver offers flexibility in choosing compatible LED modules. The small dimensions of this driver are ideal for compact luminaires and an optional cable clamp allows independent installations. Additionally a high quality of light can be achieved thanks to the low ripple.
Product family features
- Supply voltage: 220…240 V
- Line frequency: 50 Hz | 60 Hz
- Line voltage: 198…264 V
- According to EN 61347-1, 61347-2-13, 62384
- RI suppression: to EN 55015
- Line harmonics according to EN 61000-3-2
- Immunity according to EN 61547
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- Cable clamp kit for independent mounting
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 15/220…240/500 LT2 S
|
15…50 V | 150…500 mA | 970 mm | 430 mm | 295 mm | ||
|
|
OT FIT 40/220…240/1A0 LT2 S
|
15…50 V | 500…1050 mA | 970 mm | 430 mm | 295 mm |