IT DALI 42/220…240/1A0 CS
Product family benefits
- Safety ensured by OSRAM (SELV)
- DALI-2 certified
- High flexibility due to eight different output currents
- Touch DIM application: easy to control via pushbutton or sensor
- Easy to use in corridors and restrooms because of three-level Corridor function
- Higher quality of light thanks to low output ripple current
- Small housing for flexible luminaire designs
- Housing from 80% recycled plastic
Areas of application
- Offices
- Shops
- Hospitality
- Panels, spotlight, downlight, and other indoor LED luminaires
- Suitable for indoor SELV equivalent installations
- Suitable for luminaires of protection classes I and II
- Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Total harmonic distortion
< 10 %
Power factor λ
098
Efficiency in full-load
89 %
Device power loss
5.4 W
Protective conductor current
<0.7 mA
Inrush current
30 A
Max. ECG no. on circuit breaker 10 A (C)
27
Max. ECG no. on circuit breaker 10 A (B)
18
Max. ECG no. on circuit breaker 16 A (C)
42
Max. ECG no. on circuit breaker 16 A (B)
28
Max. ECG no. on circuit breaker 25 A (B)
44
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
15…42 V
U-OUT (working voltage)
60 V
Nominal output current
700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
10.5...42 W
Maximum output power
42 W
Galvanic isolation DALI/mains
Basic
Galvanic isolation primary/secondary
SELV
Default output current
900 mA
Current set
DipSwitch
Power loss in stand-by mode
<0.5 W
Galvanic isolation DALI/output
SELV
Networked standby power
<0.50 W
Dimensions & weight
Mounting hole spacing, length
88.0 mm
Mounting hole spacing, width
34.0 mm
Product weight
13750 g
Cable cross-section, input side
0.5…1.5 / 0.75…1.5 mm²
Cable cross-section, output side
0.5…1.5 / 0.75…1.5 mm²
Wire preparation length, input side
7…8 mm
Wire preparation length, output side
7…8 mm
Length
970 mm
Height
295 mm
Width
430 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20…+50/-20…+45 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-25…85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 h
Additional product data
Encapsulated
No
Predecessor EAN
4052899617155
Capabilities
Dimmable
Yes
Dimming interface
DALI-2 / Touch DIM / Corridor
Dimming range
1…100 %
Dimming method
Amplitude Modulation
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
Detection angle (Light sensor)
-
Detection angle (PIR)
-
Suitable for through-wiring
No
Suitable for emergency lighting
Yes
Number of channels
1
Programming interface
Dipswitch
Control interface
DALI-2
Constant lumen function
No
Programming
Tuner4TRONIC Field App
No
Tuner4TRONIC
Yes
Box programming
No
Programming device
DALI / DIPswitch
Programmable features
Configuration Lock
Yes
Constant Lumen
No
Lamp Operating Time
No
End of Life
No
Driver Guard
No
DALI Settings
Yes
Emergency Mode
Yes
Soft Switch Off
No
Dim to Dark
No
TouchDIM + Sensor
Yes
Corridor Functionality
Yes
OEM Key
No
Certificates & standards
Approval marks – approval
CE / ENEC / EL / RCM / UKCA / CCC / KC / BIS
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to EN 55015/Acc. to IEC 61547/Acc. to IEC 61000-3-2/Acc. to IEC 62384
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
29-11-2023
Primary Article Identifier
4062172306256
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
be3927d7-050d-4994-a4d4-e36cd628fc30
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172306256 |
UNV
| 1 | 97mm x 43mm x 30mm | 138.00g | 0.12dm³ |
| 4062172306263 |
VS
| 20 | 228mm x 208mm x 78mm | 2953.00g | 3.70dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Product family features
- Supply voltage: 220…240 V
- Line voltage: 198…264 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Lifetime: up to 50,000 h (temperature at max. tc )
- Type of protection: IP20
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
IT DALI 12/220…240/300 CS
|
9…42 V | 90 / 100 / 120 / 150 / 180 / 200 / 250 / 300 mA | 1300 mm | 300 mm | 222 mm | ||
|
IT DALI 30/220…240/700 CS
|
15…42 V | 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA | 970 mm | 430 mm | 295 mm | ||
|
|
IT DALI 42/220…240/1A0 CS
|
15…42 V | 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA | 970 mm | 430 mm | 295 mm |